K3MA-J Process Meter

Highly Visible LCD Display with 2-color (Red and Green) LEDs

• Multi-range DC voltage/current input.

• Front-panel key operation for easy setting.
• Average processing function suppresses flicker.
• Scaling, front-panel forced-zero, zero-limit functions.
• Easy confirmation of max/min display.
• Short 80-mm depth (measured from edge of face plate).
• Finger protective cover (standard equipment) guards against electric shock.
• Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
• Recognized to U.S. and Canadian requirements under the Component Recognition Program of UL.
• CE marking.Hướng dẫn cài đặt k3ma-j

  Tài liệu tiếng việt K3MA-J

  Catalog tiếng anh K3MA-J

  Features

  Highly Visible LCD Display   LCD with Backlight Provides Excellent Visibility  Characters are easy to read even in brightly lit places.   Totally Programmable Display ColorsThe display can be programmed to change colors. For example, it can be set to display in green normally, and in red for errors; or to change from either green to red or red to green when output turns ON; or to display only in one color, red or green. Bright, Changeable Red and Green Display Colors Show Conditions at a Glance The measurement display can be set to change colors according to  the comparative output, to show conditions even at a distance.    Settings are easy to make, with front-panel key operationDigital processing simplifies adjustment and setting operations. There is no need to apply actual input signals.     NEMA4X (IP66 equivalent) water- and dust-proof structure The front panel is washable and can be handled with wet hands, making it highly suitable, for example, for use in food processing and in other systems requiring water. Front Panel Features ScalingThis feature converts input signals into desired physical values. For example, a pressure sensor is connected in which a current range of 4 to 20 mA corresponds to a pressure range of 0 to 100 kPa. The readout for the input of 4mA is converted into “0” and that for the input of 20 mA is converted into “100” (kPa). Since scaling converts the input signal from a value of current into a unit (kPa) that is used in the system, it enables easier, intuitive understanding. Comparative OutputThis feature compares a scaled value (measurement value) with a programmed OUT set value and performs an output action according to the comparison result. This is useful in monitoring various systems for malfunction or determining whether products are acceptable. Three types of comparative outputs are available: those produced at the OUT upper-limit value, the OUT lower-limit value, and both the OUT values. Forced-zero This feature shifts a process value to zero. Forced-zero can be used to evaluate and display the deviation of a process value from a reference value.

  Application Examples

  Monitoring interior tank pressure Monitoring gas pressure Inspection instruments in food or pharmaceutical plants. Displaying/outputting liquid level Monitoring liquid level in cleaning tanks Water tanks, devices using chemicals, etc. Flow rate sensor Monitoring send out flow rate Water processing devices, etc.

  
  

ZN-DPX21-S Differential Pressure Station

ZN-DPX21-SA (Station)
ZN-DPS11-S (Sensor head: 1.5 m type)
ZN-DPS15-S (Sensor head: 10 m type)

* Zero point accuracy: ±0.2 Pa

Precision Measurement of Differential Pressure Inside and Outside of Clean Room or Booth. Clearly Visualize Differential Pressure Shifts at All Times.

Clearly visualize differential pressure shifts at all times.

Catalog ZN-DPX21-S

Features

OMRON introduces Differential Pressure Station –clearly visualize differential pressure shifts at all times! Ultra wide-range precision measurement This ensures a range of minus 500 to plus 500 Pa and differential pressure accuracy of plus/minus 3%. With more accurate differential pressure control, clean room environments can be effectively maintained. Built-in hybrid logging engine Data can be logged to the unit (SD Card) while communicating with PC (or PLC) via LAN. Even in the event of network failure, the unit will continue to record data. Production technology divisions can centrally control management via network while manufacturing floors can localize control using SD cards. Easily construct a wide range of control systems Built-in alarm output makes the station an effective part of all kinds of control systems. ● Positive pressure level alert for clean environments ● Automatic control of air conditioning level based on differential pressure level   Simple visualization software included as a standard Simple, user-friendly PC software is included as standard. Unit setup and data logging can be possible via LAN network. Also, logged data can be easily displayed in a waveform graph. With back-up using commercially available AAA batteries, operation continues even during sudden power outage With built-in battery backup feature, LAN transmission and logging operation won’t stop even in the event of power outage or sudden disconnection. * In network mode, operation continues for approximately two hours on batteries alone. However, battery life will vary depending on the measurement environment, battery type, or battery performance. Positive pressure level in a clean booth is easily checked using this Differential Pressure Station   Calibration service also available! A Certificate of Calibration can be issued upon request. (It is necessary to ship the product back to OMRON.) To obtain a Certificate of Calibration at time of purchase, please select a type that includes a Certificate of Calibration. As the sensor head and station are digitally connected, this calibration service is available only for the sensor head. Certificate of Calibration Test Transcript Traceability Chart

EE-SX47/67 Slot-type Photomicrosensor (Non-modulated)

Catalog EE-SX47-67

Global Standard Slot-type Photomicrosensor with 50- to 100-mA Direct Switching Capacity for Built-in Application

• Series includes models that enable switching between dark-ON and light-ON operation.
• Response frequency as high as 1 kHz.
• Easy operation monitoring with bright light indicator.
• Wide operating voltage range: 5 to 24 VDC
• Models in which the light indicator turns ON for dark-ON operation are also available.
• A wide range of variations in eight different shapes.
• Flexible robot cable is provided as a standard feature for pre-wired models (EE-SX67).

Application Examples

a. RoboticsElectronic Component Manufacturing Equipment – Sequential Presses Detection of Motor Rotation for Sequential Parts Feeders  Description: A cam is used with a sensor to detect motor rotation and thus feed the hoop material at set intervals Applicable Models: EE-SX470/670, EE-SX471/671, EE-SX472/672, EE-SX473/673, EE-SX474/674, EE-SX770/771/772(A), EE-SX870/871/872(A)   b. Automated PositioningVertical or Horizontal Position This typical can be found in positioning tables and automated manufacturing equipment.  Description: In this application example, 2 EE-SX470 photomicrosensors sense the slits on the table which are evenly spaced. The position of the table is detected from the detectable slits that are different in phase. Reliable operation is assured by transmissive, high-resolution photomicrosensors with narrow slots. Applicable Models: EE-SX470/670,EE-SX471/671,EE-SX472/672,EE-SX473/673, EE-SX474/674,EE-SX770/771/772(A),EE-SX870/871/872(A) c. Checking Component Size Description: The EE-SX47/67 and EE-SX77/87 series are used in pairs to sense the displacement of a lever, which indicates component size. Applicable Models: EE-SX470/670, EE-SX471/671, EE-SX472/672, EE-SX473/673, EE-SX474/674, EE-SX770/771/772(A),EE-SX870/871/872(A)

 

G9SB Safety Relay Unit

Catalog G9SB
Ultra Slim Safety Relay Unit

• Models of width 17.5 mm available with 2 or 3 poles. Models of width 22.5 mm with 3 poles also available.

• Conforms to EN standards (TÜV approval).

• DIN track mounting possible.